| Q. | BRAND | MODEL | MAX DIAM. |
| 1 | NAKAMURA | SUPER NTY3 | 65 |
| 2 | MORI SEIKI | ZL 150 | 42 |
| 2 | POLYGIM | PL G 75 | 70 |
The wide range of machines includes horizontal CNC turning machines, Swiss type turning machines, reworking turning machines, mechanical and CNC multiple-spindle turning machine. Mondial F.A.C.E.R.T. has also a grinding and automatic visual control department.
Suitable for parts with a low ratio between length and diameter.
This category of machines can achieve small scale volume of components of high complexity.
| Q. | BRAND | MODEL | MAX DIAM. |
| 1 | NAKAMURA | SUPER NTY3 | 65 |
| 2 | MORI SEIKI | ZL 150 | 42 |
| 2 | POLYGIM | PL G 75 | 70 |
They fit to produce parts with a high ratio between length and diameter. Backbone of the company’s machinery, the sliding turning range, from a minimum of 7 axes to a maximum of 10 axes, allows to process short and long components, with limited cycle time.
| Q. | BRAND | MODEL | MAX DIAM. |
| 3 | HANWHA | STL35H | 35 |
| 5 | NOMURA | NN25YB | 25 |
| 2 | NOMURA | NN20YB | 20 |
| 1 | NOMURA | NN20B4 | 20 |
| 1 | HANWHA | XD20H | 20 |
| 2 | NOMURA | NN32YB2XB | 32 |
Production of complex components. The shop floor is equipped with extremely performing machineries, which enhance a very high speed of execution of the parts. Cycles time below three seconds is possible.
| Q. | BRAND | MODEL | MAX DIAM. |
| 2 | SCHUTTE | SCN18 | 20 |
It is suitable for low and high running parts and for complex components. It is a shop floor equipped made by machines which have the capability to set-up each single spindles independently by the others. In the last three positions it is also possible to use an additional C axe that allows drilling and milling operations, including helical ones.
| Q. | BRAND | MODEL | MAX DIAM. |
| 5 | SCHUTTE | SCN32HT | 32 |
| 1 | SCHUTTE | S36PC | 36 |
Grinding and honing machines allow external diameters and holes with tolerances below a hundredth and roughness below Ra 0,2 microns. It is a new area established to offer the internal management of these processes.
| Q. | BRAND | MODEL | MAX DIAM. |
| 1 | Off. MONZESI | MONZA510 | 2-100 |
| 1 | Off. MONZESI | MONZA520/250 | 2-150 |
| 1 | GHIRINGHELLI | 250DI | 2-70 |
| 1 | HONITECH | HT830 | 2-50 |
The shop floor allows you to work blanks coming from fine blanking, castings and sintered parts. There are fully automated machines. Loading and unloading takes place automatically, without operator.
| Q. | BRAND | MODEL | MAX DIAM. |
| 1 | MURATA | MT200 GT3 | 200 |
| 1 | MURATA | MD120 | 120 |
| 1 | MURATA | MW40 | 40 |
| 1 | TAKISAWA | TW30 | 250 |
| 1 | TAKAMAZ | X10 | 150 |
| 1 | QUASAR MF400 | 5 ax | 400×400 |
Complex testing machines that allow to check all components’ features using cameras and other suitable technologies. No – OK parts are selected and sorted by type of defect.